Flow & Level

With the help of latest technology, we are able to offer a wide range of flow & Level meters that is designed as per the specific requirements of our clients. Manufactured using high grade raw material, these meters requires negligible maintenance and are compatible with standard self sealing valves.

Vane Type Water Flow Switch

We offer vane flow switch, which are used widely to measure liquid flow changes in a number of industrial processes. These are available with the following specifications:

Specifications :

Service: Compatible liquids.
Bellow: Tin-bronze.
Vane: Stainless Steel.
Body: Forged brass.
Temperature Limit: 230ºF (110ºC).
Pressure Limit: 145 psig (10 bar).
Enclosure Rating: NEMA 4 (IP64).
Switch Type: SPDT snap switch.
Electrical Rating: 10A res, 3A ind @ 250 VAC.
Electrical Connection: Cable gland with attached wire leads.
Process Connection: 1?? male NPT.
Mounting Orientation: Switch must be installed vertically on horizontal pipe runs.
Set Point Adjustment: Four vane combinations and an adjustment screw.
Enclosure: Die-cast aluminum alloy.
Weight: 28.22 oz (0.8 kg).

Send Enquiry

Capacitive Level Switch

We offer superior quality of capacitive level switch that are available at industry leading prices and are known for their accurate readings. These are provided to our clients in the following specifications:

Specifications :

Service: liquids, powder, and bulk materials compatible with wetted materials.
Wetted materials: 316 ss and polyvinylidene fluoride (pvdf).
Temperature limits: ambient: -40 to 185°f (-40 to 85°c), -4 to 185°f (-20 to 85°c) with under 24 vac/dc power supply. Process: -40 to 250°f (-40 to 121°c).
Pressure limit: 365 psi (25 bar).
Enclosure rating: weatherproof, nema 4x (contact factory for explosion-proof).
Switch type: dpdt (two form c).
Electrical rating: 8a @ 120/240 vac res. , 30 vdc. 1/2 hp @ 120 vac and 1/4 hp
@ 240 vac ind.
Power requirements: 12 to 240 vac/dc.
Power consumption: 2. 8 watts max.
Electrical connection: 1/2? ? Npt conduit opening, screw termination with removable terminal block.
Process connection: see model chart.
Mounting orientation: vertical or horizontal.
Set point adjustment: trips when product touches probe. Cut or extend probe to length of desired trip point. Can be cut as short as 1? ? And can be extended by welding on to probe. (minimum length will be affected by material being sensed. )
Response time: 0. 2 seconds.
Time delay: adjustable, 0 to 60 seconds.
Spark/static protection: 10 meg ohm dissipation resistances with spark gap.
Surge current: to 100a max.
Sensitivity: 8 selectable settings, 1, 2, 4, 6, 8, 10, 14, 20 pf (at 30 pf nominal free capacitance).

Send Enquiry

Ultrasonic Level Transmitter

Offering an array of reliable electronic measuring instruments, we offer precision engineered ultrasonic transmitter that are renowned across the globe for their reliable readings. Our range of ultrasonic transmitters is available in the following specifications:

Specifications :

Range: 10 ft (3 m).
Service: Liquids.
Wetted Material: UT125: CPVC.
Accuracy: ±0.25% full scale.
Repeatability: 1/8” (3.2 mm) typical.
Temperature Limits: Sensor:–20 to 160°F (–29 to 71°C), Electronics:
–10 to 170°F (–23 to 77°C) compensated over full range of sensor.
Pressure Limits: 100 psig (6.9 bar).
Blind Zone: 6?? (15 cm).
Beam Angle: Conicle 12°.
Power Requirements: 16 to 30 VDC.
Output Signal: 4 to 20 mA DC (isolated), 4-wire.
Zero and Span Adjustments: Zero: 6??to 114?? (15 to 290 cm), Span: 1?? to 120?? (2.5 to 305 cm).
Process Connection: 3/4?? male NPT.
Enclosure Rating: UT125: NEMA 7, cast aluminum.

Send Enquiry

Mr. Mahdi Hasan (Manager)
302 - 304, Damji Shamji Industrial Complex, 9, L. B. S. Marg, Kurla (W)
Mumbai, Maharashtra - 400 070, India
Telephone: +(91)-(22)-25126500/ 25126900

Contact via E-mail

Contact via Mobile

Contact via SMS